Journal of Prosthodontics: implant, esthetic, and reconstructive dentistry

Journal

Publication Venue For

  • Cleaning Zirconia Surface Prior To Bonding: A Comparative Study of Different Methods and Solutions.  31:239-244. 2022
  • Evaluation of Candida albicans Adherence to CAD-CAM Milled, 3D-Printed, and Heat-Cured PMMA Resin and Efficacy of Different Disinfection Techniques: An In Vitro Study 2022
  • Laboratory Trends for Removable Prosthodontics: A Comparison of Two Surveys.  30:264-270. 2021
  • Effect of Surface Treatment and Cement on Fracture Load of Traditional Zirconia (3Y), Translucent Zirconia (5Y), and Lithium Disilicate Crowns.  28:659-665. 2019
  • Remake Rates for Single-Unit Crowns in Clinical Practice: Findings from The National Dental Practice-Based Research Network.  28:122-130. 2019
  • Preparation Techniques Used to Make Single-Unit Crowns: Findings from The National Dental Practice-Based Research Network.  27:813-820. 2018
  • Impression Techniques Used for Single-Unit Crowns: Findings from the National Dental Practice-Based Research Network.  27:722-732. 2018
  • Evaluation of Different Polishing Systems and Speeds for Dental Zirconia.  26:410-418. 2017
  • Cleaning Methods for Zirconia Following Salivary Contamination.  25:375-379. 2016
  • A Technique to Evaluate the Space for Retentive Components under a Removable Prosthesis.  25:252-255. 2016
  • Use of Orbital Conformer to Improve Speech in Patients with Confluent Maxillectomy and Orbital Defects.  25:241-246. 2016
  • Influence of Implant Angulation on the Fracture Resistance of Zirconia Abutments.  24:127-135. 2015
  • Influence of Low-Temperature Environmental Exposure on the Mechanical Properties and Structural Stability of Dental Zirconia.  21:363-369. 2012
  • The Effect of Different Fabrication Steps on the Marginal Adaptation of Two Types of Glass-Infiltrated Ceramic Crown Copings Fabricated by CAD/CAM Technology.  21:167-172. 2012
  • Sectional impressions and simplified folding complete denture for severe microstomia.  19:299-302. 2010
  • Variability of mechanical torque-limiting devices in clinical service at a US dental school.  19:20-24. 2010
  • Comparison of the passivity between cast alloy and laser-welded titanium overdenture bars.  18:656-662. 2009
  • A preliminary survey of impression trays used in the fabrication of fixed indirect restorations.  18:582-588. 2009
  • A comparison of retention characteristics in prefabricated and custom-cast dental attachments.  18:388-392. 2009
  • Interim obturator retained by an extraoral device: A clinical report.  17:582-585. 2008
  • The effect of etching technique on the retention of adhesively cemented prefabricated dowels.  17:445-450. 2008
  • Using silicone impression material and acrylic resin to fabricate remount casts for removable partial dentures.  14:137-140. 2005
  • Dental erosion and aspirin headache powders: A clinical report.  9:95-98. 2000
  • Dental implant materials: Commercially pure titanium and titanium alloys.  8:40-43. 1999
  • Vertical height loss: An investigation of four restorative materials opposing enamel.  8:252-257. 1999
  • Esthetics: Patients' perceptions of dental attractiveness.  5:166-171. 1996
  • Informed Consent for the Prosthodontic Patient With Temporomandibular Disorders.  4:205-209. 1995
  • International Standard Serial Number (issn)

  • 1059-941X
  • Electronic International Standard Serial Number (eissn)

  • 1532-849X