Positions

Selected Publications

Academic Article

Year Title Altmetric
2019 Trunnion Corrosion in Total Hip Arthroplasty—Basic ConceptsOrthopedic Clinics of North America.  50:281-288. 2019
2016 Factors influencing the progression of noncarious cervical lesions: A 5-year prospective clinical evaluationJournal of Prosthetic Dentistry.  115:571-577. 2016
2016 In Memoriam--Samuel F. Hulbert, Ph.D., 1936-2016: On January 29th of this year, the world of biomaterials and biomedical engineering lost a true visionary and champion with the passing of Samuel "Sam" HulbertJournal of Biomedical Materials Research Part A.  104:1062-1063. 2016
2016 In vivo monitoring of the inflammatory response in a stented mouse aorta modelJournal of Biomedical Materials Research Part A.  104:227-238. 2016
2016 Metallic stents: Biomechanical analysis and in vivo investigation of the vessel inflammatory responseIFMBE Proceedings.  57:1075-1078. 2016
2015 Effect of imaging powder and CAD/CAM stone types on the marginal gap of zirconia crownsJournal of the American Dental Association.  146:111-120. 2015
2015 Influence of Implant Angulation on the Fracture Resistance of Zirconia Abutments 2015
2014 Multi-scale mechanical investigation of stainless steel and cobalt-chromium stentsJournal of the Mechanical Behavior of Biomedical Materials.  40:240-251. 2014
2013 An EBSD based comparison of the fatigue crack initiation mechanisms of nickel and nitrogen-stabilized cold-worked austenitic stainless steels 2013
2013 Bone Formation Under the Elevated Sinus Membrane Using Venous Coagulum.Clinical advances in periodontics.  3:200-207. 2013
2013 An extension-distraction injury of the thoracic spine with traumatic partial correction of thoracic kyphosis. 2013
2013 Stent overlapping and geometric curvature influence the structural integrity and surface characteristics of coronary nitinol stentsJournal of the Mechanical Behavior of Biomedical Materials.  20:227-236. 2013
2012 Stent overlapping and geometric curvature influence the structural integrity and surface characteristics of coronary stentsASME 2012 Summer Bioengineering Conference, SBC 2012.  559-560. 2012
2012 The failure load of CAD/CAM generated zirconia and glass-ceramic laminate veneers with different preparation designsJournal of Prosthetic Dentistry.  108:386-393. 2012
2012 Influence of Low-Temperature Environmental Exposure on the Mechanical Properties and Structural Stability of Dental Zirconia 2012
2012 Evaluation of the optical properties of CAD-CAM generated yttria-stabilized zirconia and glass-ceramic laminate veneersJournal of Prosthetic Dentistry.  107:300-308. 2012
2012 2011 panel on developing a biomaterials curriculumJournal of Biomedical Materials Research Part A.  100 A:802-816. 2012
2012 The role of vascular calcification in inducing fatigue and fracture of coronary stents 2012
2011 Biocorrosion and biomechanical analysis of vascular stentsASME 2011 Summer Bioengineering Conference, SBC 2011.  769-770. 2011
2010 In-vivo corrosion and local release of metallic ions from vascular stents into surrounding tissueJournal of Invasive Cardiology.  22:528-535. 2010
2010 Bone properties surrounding hydroxyapatite-coated custom osseous integrated dental implants 2010
2010 Clinical device-related article surface characterization of explanted endovascular stents: Evidence of in vivo corrosion 2010
2010 Retrieval and Analysis of Explanted and In Situ Implants Including Bone GraftsOral and Maxillofacial Surgery Clinics of North America.  22:419-423. 2010
2010 Stainless steel ions stimulate increased thrombospondin-1-dependent tgf-beta activation by vascular smooth muscle cells: Implications for in-stent restenosisJournal of Vascular Research.  47:309-322. 2010
2010 Human postmortem device retrieval and analysis - Orthopaedic, cardiovascular, and dental systemsJournal of Long-Term Effects of Medical Implants.  20:81-85. 2010
2010 Reporting and notification of adverse events in orthopaedicsJournal of the American Academy of Orthopaedic Surgeons.  18:193-198. 2010
2009 Comparison of the passivity between cast alloy and laser-welded titanium overdenture bars 2009
2009 Corrosion of metallic endovascular stents and analyses of wear debris in tissuesProceedings of the ASME Summer Bioengineering Conference 2009, SBC2009.  1125-1126. 2009
2009 Histomorphometric evaluation of a nanothickness bioceramic deposition on endosseous implants: A study in dogs 2009
2009 Local release of metallic ions from stents into vascular tissue and associated alterations of stent surfacesProceedings of the ASME Summer Bioengineering Conference, SBC2008.  759-760. 2009
2009 Physico/chemical characterization and in vivo evaluation of nanothickness bioceramic depositions on alumina-blasted/acid-etched Ti-6Al-4V implant surfacesJournal of Biomedical Materials Research Part A.  90:351-361. 2009
2009 Validation of strain gauges as a method of measuring precision of fit of implant barsImplant Dentistry.  18:151-161. 2009
2009 Basic research methods and current trends of dental implant surfaces 2009
2009 Clinical device-related article micro-computed tomographic analysis of bone healing subsequent to graft placement 2009
2009 Early healing of nanothickness bioceramic coatings on dental implants. An experimental study in dogs 2009
2009 A novel technique for the quantification of demineralized bone matrix versus new bone in dental extraction socketsJournal of Histotechnology.  32:204-206. 2009
2009 Surface Roughness of CoCr and ZrO(2) Femoral Heads with Metal Transfer: A Retrieval and Wear Simulator Study.International Journal of Biomaterials.  2009:185456. 2009
2008 Early failure of a cross-linked polyethylene acetabular liner: A case report 2008
2008 Efficacy of platelet-rich plasma on wound healing in rabbitsJournal of Periodontology.  79:691-696. 2008
2008 Preliminary tribological evaluation of nanostructured diamond coatings against ultra-high molecular weight polyethylene 2008
2008 Biocompatibility testing of simulated total joint arthoplasty articulation debris 2008
2007 Micromechanics for fiber volume percent with a photocure vinyl ester compositePolymer Composites.  28:294-310. 2007
2007 Accelerating aging of zirconia femoral head implants: Change of surface structure and mechanical properties 2007
2007 A biomechanical study of periacetabular defects and cement fillingJournal of Biomechanical Engineering.  129:129-136. 2007
2007 Fracture toughness micromechanics by energy methods with a photocure fiber-reinforced compositePolymer Composites.  28:311-324. 2007
2007 Surface analysis and biocorrosion properties of nanostructured surface sol-gel coatings on Ti6Al4V titanium alloy implants 2007
2006 Bone associated with implants in diabetic and insulin-treated ratsClinical Oral Implants Research.  17:495-500. 2006
2006 Osteoblast adhesion and matrix mineralization on sol-gel-derived titanium oxideBiomaterials.  27:2201-2212. 2006
2006 Stress-transfer micromechanics for fiber length with a photocure vinyl ester compositePolymer Composites.  27:153-169. 2006
2005 Corrosion on spinal implantsJournal of Spinal Disorders and Techniques.  18:247-251. 2005
2005 Comparative evaluations of surface characteristics of cp titanium, Ti-6Al-4V and Ti-15Mo-2.8Nb-0.2Si (Timetal® 21SRx) 2005
2005 Dual-energy X-ray absorptiometry analysis of implants in rat tibiaeImplant Dentistry.  14:294-300. 2005
2005 Boron and Boron-based coatings as deposited by the cathodic arc techniqueAdvanced Materials and Processes.  163:62. 2005
2005 Surface modification of surface sol-gel derived titanium oxide films by self-assembled monolayers (SAMs) and non-specific protein adsorption studiesColloids and Surfaces B: Biointerfaces.  42:29-43. 2005
2005 A comparison of torque required to fracture rotary files with tips bound in simulated curved canalJournal of Endodontics.  31:468-470. 2005
2005 Biologic mechanical advantages of 3 different cranial bone grafting techniques for implant reconstruction of the atrophic maxillaJournal of Oral and Maxillofacial Surgery.  63:63-67. 2005
2005 Biphasic and preferentially oriented microcrystalline calcium phosphate coatings: In Vitro and in Vivo studiesKey Engineering Materials.  284-286:207-210. 2005
2004 Rationale for the application of immediate load in implant dentistry: Part IIImplant Dentistry.  13:310-321. 2004
2004 Biomaterials, biomechanics, tissue healing, and immediate-function dental implants 2004
2004 Examination of surface and material properties of explanted zirconia femoral headsJournal of Arthroplasty.  19:30-34. 2004
2004 An amino acid-modified and non-HEMA containing glass-ionomer cementBiomaterials.  25:1825-1830. 2004
2004 Rationale for the application of immediate load in implant dentistry: Part IImplant Dentistry.  13:207-217. 2004
2003 A Modified Test for Patellar Instability: The Biomechanical BasisClinical Journal of Sport Medicine.  13:327-338. 2003
2003 Polyethylene damage on the nonarticular surface of modular total knee prosthesesClinical Orthopaedics and Related Research.  410:248-253. 2003
2003 A comparison of torque required to fracture three different nickel-titanium rotary instruments around curves of the same angle but of different radius when bound at the tipJournal of Endodontics.  29:55-57. 2003
2003 Prosthetic implant associated sarcomas: A case report emphasizing surface evaluation and spectroscopic trace metal analysisAnnals of Diagnostic Pathology.  7:35-46. 2003
2002 Gamma irradiation alters fatigue-crack behavior and fracture toughness in 1900H and GUR 1050 UHMWPE 2002
2002 Quasi-linear viscoelastic behavior of the human periodontal ligamentJournal of Biomechanics.  35:1411-1415. 2002
2002 Nanostructured Ceramics for Biomedical ImplantsJournal of Nanoscience and Nanotechnology.  2:293-312. 2002
2002 Nanoindentation hardness and adhesion investigations of vapor deposited nanostructured diamond filmsJournal of Applied Physics.  91:5347-5352. 2002
2002 Histomorphological evaluation of loaded plate-form and root-form implants in Macaca mulatta monkeysClinical Oral Implants Research.  13:214-220. 2002
2002 Failure characteristics of multiple-component fibrin-based adhesives 2002
2002 Nonlinear stress-strain behavior of periodontal ligament under orthodontic loadingAmerican Journal of Orthodontics and Dentofacial Orthopedics.  122:174-179. 2002
2001 Analysis of TI-6Al-4V Implants Place with Fibroblast Growth Factor 1 in Rat TibiaeInternational Journal of Oral and Maxillofacial Implants.  16:495-502. 2001
2001 Implants in regenerated bone in a primate modelJournal of Periodontology.  72:703-708. 2001
2001 Medical devices, health care, and consensus standardsStandardization news : SN.  29:36. 2001
2001 Radioimaging of implants in rats using Tc-99m-MDPClinical Oral Implants Research.  12:372-378. 2001
2001 Strength analysis of le fort I osteotomy fixation: Titanium versus resorbable platesJournal of Oral and Maxillofacial Surgery.  59:1034-1039. 2001
2000 Bone Response to Titanium Alloy Implants Placed in Diabetic RatsInternational Journal of Oral and Maxillofacial Implants.  15:345-354. 2000
2000 Cleaning and Heat-Treatment Effects on Unalloyed Titanium Implant SurfacesInternational Journal of Oral and Maxillofacial Implants.  15:219-230. 2000
2000 Modulation of mechanical properties in multiple-component tissue adhesives 2000
2000 Guided bone regeneration of large mandibular defects in a primate modelJournal of Periodontology.  71:1484-1491. 2000
1999 Effects of corticosteroids on trabecular bone mechanical properties in a rabbit modelAmerican Society of Mechanical Engineers, Bioengineering Division (Publication) BED.  42:497-498. 1999
1999 Polyethylene wear characteristics in retrieved total knee replacementsAmerican Society of Mechanical Engineers, Bioengineering Division (Publication) BED.  43:7-8. 1999
1999 Wear characteristics of Sivash/SRN Co-Cr-Mo THA articulating surfacesASTM Special Technical Publication.  159-172. 1999
1998 Wear of retrieved CoCrMo articulating surfaces in total hip arthroplastyAmerican Society of Mechanical Engineerings, Bioengineering Division (Publication) BED.  39:287-288. 1998
1998 Effect of surface treatment on unalloyed titanium implants: Spectroscopic analyses 1998
1998 Surface modifications of surgical implantsSurface and Coatings Technology.  103-104:135-137. 1998
1998 Effect of and dry heat-sterilization on surface energy and topography of unalloyed titanium implantsColloids and Surfaces A: Physicochemical and Engineering Aspects.  135:89-101. 1998
1998 Intervertebral spacer as an adjunct to anterior lumbar fusion. Part I. Design, fabrication, and testing of three prototypesJournal of Spinal Disorders.  11:129-135. 1998
1998 Intervertebral spacer as an adjunct to anterior lumbar fusion. Part II. Six-month implantation in BaboonsJournal of Spinal Disorders.  11:136-141. 1998
1998 Proteoglycans at the bone-implant interfaceJournal of Dental Research.  9:449-463. 1998
1998 The wear characteristics of Sivash®/SRN® CO-CR-MO THA articulating surfacesASTM Special Technical Publication.  1346:159-172. 1998
1998 Unanticipated Outcomes: Dental ImplantsImplant Dentistry.  7:351-354. 1998
1997 The development and characterization of a fracture-toughened acrylic for luting total joint arthroplasties 1997
1997 Fracture mechanics of polyethylene pitting wear in TKR: Pilot finite element modelsAmerican Society of Mechanical Engineerings, Bioengineering Division (Publication) BED.  35:109-110. 1997
1997 Implant retrieval and its medical interest 1997
1997 Changes in patient screening for a clinical study of dental implants after increased awareness of tobacco use as a risk factorJournal of Oral and Maxillofacial Surgery.  55:72-75. 1997
1996 Surface characterization of radio-frequency glow discharged and autoclaved titanium surfacesInternational Journal of Oral and Maxillofacial Implants.  11:435-442. 1996
1996 Interfacial shear strength and histology of plasma sprayed and sintered hydroxyapatite implants in vivoBiomaterials.  17:1965-1970. 1996
1996 Investigation of video techniques for dynamic measurements of relative vertebral-body motion in vitro 1996
1996 Analysis of consecutively placed loaded root-form and plate-form implants in adult Macaca mulatta monkeysJournal of Periodontology.  67:1322-1328. 1996
1996 Ceramics: Past, present, and futureBONE.  19:S121-S128. 1996
1995 Erratum: Surface energy characterization of unalloyed titanium implants (Journal of Biomedical Materials Research (1994) 28 (1419-1425)) 1995
1995 Total Hip Replacement 1995
1995 Symposium: the relationship between polyethylene quality and wear. 1995
1995 The Effects of Graft Rotation on Attachment Site Separation Distances in Anterior Cruciate Ligament ReconstructionAmerican Journal of Sports Medicine.  23:282-287. 1995
1994 Clinical and laboratory investigations of fretting and corrosion of a three-component modular femoral stem designJournal of Long-Term Effects of Medical Implants.  4:177-191. 1994
1994 Biomaterial and design concepts to minimize wear in total joint arthroplasties. 1994
1994 Evaluation of consecutively placed unloaded root-form and plate-form implants in adult Macaca mulatta monkeys.Journal of Periodontology.  65:788-795. 1994
1994 Surface energy characterization of unalloyed titanium implants 1994
1994 The use of guided bone regeneration to fill large mandibular defects in monkeys: A pilot studyInternational Journal of Oral and Maxillofacial Implants.  9:1-18. 1994
1994 The use of guided bone regeneration to fill large mandibular defects in monkeys: A pilot studyInternational Journal of Oral and Maxillofacial Implants.  9:644-652. 1994
1993 Ceramics in orthopedic surgery.Surgical Technology International.  2:425-428. 1993
1993 HA-coated root-form implants--is there cause for concern? 1993
1993 Arthroscopy training using a “Black box” techniqueArthroscopy: The Journal of Arthroscopy and Related Surgery.  9:338-340. 1993
1993 Evaluation of the medial soft-tissue restraints of the extensor mechanism of the knee 1993
1992 In vitro strength analysis of sagittal split osteotomy fixation: noncompression monocortical plates versus bicortical position screws.Journal of Oral and Maxillofacial Surgery.  50:1295-1299. 1992
1992 Strain-gauge evaluation of lunate unloading procedures.Journal of Hand Surgery (American Volume).  17:437-443. 1992
1992 Biodegradation of restorative metallic systems.Advances in Dental Research.  6:32-37. 1992
1992 Biomaterials developmentDental Materials.  8:375. 1992
1992 In vitro strength analysis of sagittal split osteotomy fixation: Noncompression monocortical plates versus bicortical position screwsJournal of Oral and Maxillofacial Surgery.  50:1295-1299. 1992
1992 Intraoral corrosion resulting from coupling dental implants and restorative metallic systemsImplant Dentistry.  1:107-112. 1992
1992 Retrieval analyses of a blade implant after 231 months of clinical functionImplant Dentistry.  1:37-43. 1992
1992 Strain-gauge evaluation of lunate unloading proceduresJournal of Hand Surgery (American Volume).  17:437-443. 1992
1991 B. Treatment and rehabilitation [515] Development and testing of new spinal implant systemsBulletin of prosthetics research.  28:409. 1991
1991 Evaluation of cryopreserved bone and synthetic biomaterials in promoting spinal fusionSpine.  16:330-333. 1991
1991 In vitro vs in vivo corrosion analyses of two alloysJournal of Investigative Surgery.  4:13-21. 1991
1991 The biologic effects of implant materialsJournal of Orthopaedic Research.  9:760-775. 1991
1991 The influence of radiation therapy on subperiosteal hydroxyapatite implants in rabbitsJournal of Oral and Maxillofacial Surgery.  49:730-734. 1991
1990 Bioceramics: Is there a difference?Clinical Orthopaedics and Related Research.  153-158. 1990
1990 Clinical longevities of ramus frame implants. 1990
1990 Dental implant biomaterials.Journal of the American Dental Association.  121:716-719. 1990
1990 Histologic response after implantation of porous hydroxylapatite ceramic in humansInternational Journal of Oral and Maxillofacial Implants.  5:255-263. 1990
1990 Histologic response after implantation of porous hydroxylapatite ceramic in humansInternational Journal of Oral and Maxillofacial Implants.  5:1-19. 1990
1990 Metal-induced sarcoma. A case report and literature reviewClinical Orthopaedics and Related Research.  299-306. 1990
1990 Multiaxis cyclic biomechanical testing of harrington, luque, and drummond implantsSpine.  15:15-20. 1990
1989 Corrosion of copper, nickel, and gold dental casting alloys: An in vitro and in vivo study 1989
1989 Corrosion of dental copper, nickel, and gold alloys in artificial saliva and saline solutionsDental Materials.  5:324-328. 1989
1989 Synthetic biomaterials for spinal fusionOrthopedics.  12:543-548. 1989
1988 Dental implant retrieval analyses.Journal of Dental Education.  52:748-756. 1988
1988 Dental implant retrieval analyses. 1988
1988 Hydroxyapatite coatingsClinical Orthopaedics and Related Research.  235:220-223. 1988
1988 Significance of the Porosity and Physical Chemistry of Calcium Phosphate Ceramics: Orthopedic UsesAnnals of the New York Academy of Sciences.  523:278-282. 1988
1988 Tensile Strength Comparison of Dowel Plug Technique to Standard Techniques of Tendon-Bone AttachmentFoot and Ankle International.  8:248-253. 1988
1987 Dental implant research. 1987
1987 Biodegradation phenomena observed in in vivo and in vitro spinal instrumentation systemsSpine.  12:605-608. 1987
1987 Effect of metal surfacing on the color characteristics of porcelain veneerDental Materials.  3:97-101. 1987
1986 Corrosion and ion transfer from porous metallic alloys to tissues. 1986
1986 Implant dentistry forefront '85. Surface evaluation of materials. 1986
1986 Ag-Pd alloys for resin-bonded retainersDental Materials.  2:220-224. 1986
1986 Biomaterials, biocompatibility, and peri-implant considerations.Dental Clinics of North America.  30:3-23. 1986
1986 Displacements of precious and nonprecious dental bridges utilizing endosseous implants as distal abutments 1986
1986 In vitro calcification and in vivo biocompatibility of the cross‐linked polypentapeptide of elastin 1986
1986 Properties of biomaterialsJournal of Arthroplasty.  1:143-147. 1986
1985 Compressive strength measurement and microstructure studies of hydroxyapatite conesJournal of Prosthetic Dentistry.  54:691-696. 1985
1985 Cyclic axial loading of spinal implantsSpine.  10:792-798. 1985
1985 Evaluation of a subcutaneously implanted hydroxylapatite-avitene mixture in rabbitsJournal of Oral and Maxillofacial Surgery.  43:277-280. 1985
1985 Experimental Apparatus for the Measurement of Mandibular and Associated Suprastructure DisplacementsExperimental Techniques.  9:21-23. 1985
1984 Comparative studies of a palladium-enriched amalgamJournal of Dentistry.  12:80-90. 1984
1984 Intrinsic color of isophorone polyurethane for maxillofacial prosthetics. Part I: Physical propertiesJournal of Prosthetic Dentistry.  51:519-522. 1984
1984 Intrinsic color of isophorone polyurethane for maxillofacial prosthetics. Part II: Color stabilityJournal of Prosthetic Dentistry.  51:673-675. 1984
1983 Dental implant update on biomaterials and biomechanics.The Alabama journal of medical sciences.  20:36-41. 1983
1983 Histologic study of hydroxylapatite as an implant material for mandibular augmentationJournal of Oral and Maxillofacial Surgery.  41:729-737. 1983
1983 In vitro electrochemical corrosion study of coupled surgical implant materials 1983
1982 Susceptibility of surgical cobalt‐base alloy to pitting corrosion 1982
1982 Tricalcium phosphate ceramic biodegradation studiesJournal of Dental Research.  61. 1982
1981 A comparison of three techniques for fabricating metal moldsJournal of Prosthetic Dentistry.  46:430-436. 1981
1981 Effect of cavity design on retention of Class IV composite resin restorations.Journal of the American Dental Association.  103:42-46. 1981
1981 Effects of amalgam products upon human cells in cultureJournal of Dental Research.  60. 1981
1981 Effects of carbon coupling on the in vitro corrosion of cast surgical cobalt‐base alloy 1981
1981 Host reactions to ceramic implantsJournal of Dental Research.  60. 1981
1981 Investigations on the galvanic corrosion of multialloy total hip prostheses 1981
1981 Suture techniques for atrioventricular valves. Experimental studyJournal of Thoracic and Cardiovascular Surgery.  81:528-536. 1981
1980 Bond strength of bimaterial acrylic resin combinationsJournal of Prosthetic Dentistry.  44:604-607. 1980
1979 In vitro corrosion of Ti‐6Al‐4V and type 316L stainless steel when galvanically coupled with carbon 1979
1977 Surface conditions for surgical implants and biocompatibility. 1977
1976 Biocompatibility studies on surgical‐grade titanium‐, cobalt‐, and iron‐base alloys 1976
1976 Quantitative Stereological Investigations of Porous Alumina Implant BiomaterialsJournal of Dental Research.  55:111-114. 1976
1975 Biomaterial considerations for dental implants part I: metals and alloys. 1975
1975 Biomaterials science protocols for clinical investigations on porous alumina ceramic and vitreous carbon implants 1975
1975 Investigations on the response of primate and rabbit marrow, bone, and soft tissues to porous titanium implantsJournal of Dental Research.  54:166-170. 1975
1974 Quantitative stereology investigations of porous alumina implant biomaterialsJournal of Dental Research.  53. 1974

Book

Year Title Altmetric
2013 Biomaterials Science 2013
2013 Biomaterials Science 2013
2013 Biomaterials Science: An Introduction to Materials: Third Edition 2013
2013 Introduction - Biomaterials Science: An Evolving, Multidisciplinary Endeavor 2013
2013 Preface 2013

Chapter

Year Title Altmetric
2015 Biomaterials for Dental Implants.  66-94. 2015
2013 Biomedical-Engineering Analyses of Mini Dental Implants.  35-56. 2013
2013 Dental Implantation.  882-888. 2013
2013 Introduction: Applications of Biomaterials.  757-758. 2013
2013 Introduction: Properties of Materials: The Palette of the Biomaterials Engineer.  5. 2013
2013 Voluntary Consensus Standards.  1399-1405. 2013
2013 Voluntary Standards, Regulatory Compliance, and Non-Technical Issues.  1387-1388. 2013

Education And Training

  • Doctor of Philosophy in Materials Science, University of Florida 1968
  • Master of Science in Metallurgy, University of Florida 1964
  • Bachelor of Science or Mathematics in Metallurgy, University of Florida 1963
  • Full Name

  • Jack Lemons