Positions

Selected Publications

Academic Article

Year Title Altmetric
2016 Effect of liner and porcelain application on zirconia surface structure and compositionInternational Journal of Oral Science.  8:164-171. 2016
2015 Effect of grain size on the monoclinic transformation, hardness, roughness, and modulus of aged partially stabilized zirconiaDental Materials.  31:1487-1492. 2015
2015 Effect of imaging powder and CAD/CAM stone types on the marginal gap of zirconia crownsJournal of the American Dental Association.  146:111-120. 2015
2015 Correlation of flexural strength of coupons versus strength of crowns fabricated with different zirconia materials with and without agingJournal of the American Dental Association.  146:904-912.e1. 2015
2015 Evaluation of zirconia-porcelain interface using X-ray diffractionInternational Journal of Oral Science.  7:187-195. 2015
2015 Phase transformation of dental zirconia following artificial aging 2015
2013 Direct sol-gel electrospinning of fibrous bioglass scaffolds for bone tissue engineeringJournal of biomaterials and tissue engineering.  3:440-447. 2013
2012 The failure load of CAD/CAM generated zirconia and glass-ceramic laminate veneers with different preparation designsJournal of Prosthetic Dentistry.  108:386-393. 2012
2012 Influence of Low-Temperature Environmental Exposure on the Mechanical Properties and Structural Stability of Dental Zirconia 2012
2012 Recent advances in the development of GTR/GBR membranes for periodontal regeneration - A materials perspectiveDental Materials.  28:703-721. 2012
2012 Evaluation of the optical properties of CAD-CAM generated yttria-stabilized zirconia and glass-ceramic laminate veneersJournal of Prosthetic Dentistry.  107:300-308. 2012
2011 A novel spatially designed and functionally graded electrospun membrane for periodontal regenerationActa Biomaterialia.  7:216-224. 2011
2010 Effect of environmental weathering on flexural creep behavior of long fiber-reinforced thermoplastic compositesPolymer Degradation and Stability.  95:2628-2640. 2010
2010 Acellular dermal matrix graft: Synergistic effect of rehydration and natural crosslinking on mechanical properties 2010
2010 Flexural creep of long fiber-reinforced thermoplastic composites: Effect of processing-dependent fiber variables on creep responseComposites Part A: Applied Science and Manufacturing.  41:1253-1262. 2010
2010 Processing and nonisothermal crystallization kinetics of carbon/PPS in single diaphragm formingJournal of Composite Materials.  44:915-929. 2010
2009 Freeze-dried acellular dermal matrix graft: Effects of rehydration on physical, chemical, and mechanical propertiesDental Materials.  25:1109-1115. 2009
2009 Flexural creep behavior of discontinuous thermoplastic composites: Non-linear viscoelastic modeling and time-temperature-stress superpositionComposites Part A: Applied Science and Manufacturing.  40:870-877. 2009
2009 Effects of moisture and UV exposure on liquid molded carbon fabric reinforced nylon 6 composite laminatesComposites Science and Technology.  69:839-846. 2009
2008 An annealing study of an oxygen vacancy related defect in SrTiO3 substratesJournal of Applied Physics.  104. 2008
2007 Design, manufacture and analysis of a thermoplastic composite frame structure for mass transitComposite Structures.  80:105-116. 2007
2007 Thermoplastic sandwich structure design and manufacturing for the body panel of mass transit vehicleComposite Structures.  80:82-91. 2007
2007 Morphology and mechanical properties of Nylon 6/MWNT nanofibersPolymer.  48:1096-1104. 2007
2005 Liquid molding of carbon fabric-reinforced nylon matrix composite laminatesJournal of Thermoplastic Composite Materials.  18:509-527. 2005
2004 Design and manufacture of woven reinforced glass/polypropylene composites for mass transit floor structureJournal of Composite Materials.  38:1949-1972. 2004
2003 Microstructure analysis and modeling of ingot to billet conversion in alloy 718Materials Science Forum.  426-432:809-814. 2003
2002 Characterization of interfacial reaction products in alumina fiber/barium zirconate coating/alumina matrix compositeMaterials Characterization.  48:305-314. 2002
2001 Intrinsic point defects in oxidized 3C epitaxial layers on Si substratesJournal of Applied Physics.  89:955-959. 2001
2001 Finite element analysis of reinforcement particle cracking in Al/SiCp compositesMaterials Science and Technology.  17:1339-1346. 2001
2000 Damage evolution in low velocity impacted unreinforced vinyl ester 411-350 and 411-C50 resin systemsPolymer Composites.  21:878-899. 2000
1999 Low Velocity Impact Characterization of Unreinforced Vinyl Ester 411-350 and 411-C50 Resin SystemsPolymers and Polymer Composites.  7:383-407. 1999
1999 Self-repairing approaches for resin infused composites subjected to low velocity impactAmerican Society of Mechanical Engineers, Noise Control and Acoustics Division (Publication) NCA.  26:287-299. 1999
1999 Parametric studies on self-repairing approaches for resin infused composites subjected to low velocity impactSmart Materials and Structures.  8:623-638. 1999
1999 Effects of cyclic bending and physiological solution on plasma-sprayed hydroxylapatite coatings of varying crystallinity 1999
1998 Low velocity impact characterization of neat vinyl ester 411-350 resin systemAmerican Society of Mechanical Engineers, Noise Control and Acoustics Division (Publication) NCA.  25:283-288. 1998
1997 A technique for sputter coating of ceramic reinforcement particlesSurface and Coatings Technology.  91:64-68. 1997
1996 Quantitative Characterization of Graphite in Cast IronA.F.S. Transactions.  96-129:977-983. 1996
1995 The effect of particle size and volume fraction on the aging behavior of a liquid-phase sintered SiC/aluminum composite 1995
1995 SiC particle cracking in powder metallurgy processed aluminum matrix composite materials 1995
1992 Beneficial effects of nitrogen atomization on an austenitic stainless steel 1992
1992 The microstructure of electrodeposited titanium-aluminum alloys 1992
1992 Phase transformation effects during hip of TiAlActa Materialia.  40:1645-1651. 1992
1990 Liquid phase sintered metal matrix composite materialsMaterials and Manufacturing Processes.  5:147-164. 1990
1990 The influence of interfacial structure on the mechanical properties of liquid-phase-sintered aluminum-ceramic composites 1990
1988 The influence of γ-γ′ eutectic on the mechanical properties of conventionally cast MAR-M247Materials Science and Engineering.  104:1-8. 1988
1987 THERMAL STABILITY OF THE NICKEL-BASE SUPERALLOY B-1900 plus Hf WITH TANTALUM VARIATIONS. 1987
1986 The effects of tantalum on the microstructure of two polycrystalline nickel-base superalloys: B-1900 + Hf and MAR-M247 1986

Teaching Activities

  • EGR697 - Engineering Grad Internship (Spring Term 2020) 2020
  • MSE280 - Engineering Materials (Spring Term 2020) 2020
  • MSE799 - Dissertation Research (Spring Term 2015) 2015
  • MSE799 - Dissertation Research (Summer Term 2014) 2014
  • MSE799 - Dissertation Research (Spring Term 2014) 2014
  • MSE799 - Dissertation Research (Fall Term 2013) 2013
  • MSE799 - Dissertation Research (Spring Term 2013) 2013
  • MSE799 - Dissertation Research (Fall Term 2012) 2012
  • MSE310 - Materials Engineering Lab II (Spring Term 2012) 2012
  • MSE491 - Individual Study in (Area) (Spring Term 2012) 2012
  • MSE497 - MSE Honors Research (Spring Term 2012) 2012
  • EGR301 - Honors Research I (Fall Term 2011) 2011
  • MSE011 - Coop/Internship in MSE (Fall Term 2011) 2011
  • MSE464 - Metals and Alloys (Fall Term 2011) 2011
  • MSE464L - Metals and Alloys Lab (Fall Term 2011) 2011
  • MSE564 - Metals and Alloys (Fall Term 2011) 2011
  • MSE564L - Metals and Alloys Lab (Fall Term 2011) 2011
  • MSE799 - Dissertation Research (Fall Term 2011) 2011
  • MSE799 - Dissertation Research (Summer Term 2011) 2011
  • MSE310 - Materials Engineering Lab II (Spring Term 2011) 2011
  • MSE497 - MSE Honors Research (Spring Term 2011) 2011
  • MSE798 - Non-Dissertation Research (Spring Term 2011) 2011
  • MSE799 - Dissertation Research (Spring Term 2011) 2011
  • MSE410 - Materials Engineering Lab III (Fall Term 2010) 2010
  • MSE464 - Metals and Alloys (Fall Term 2010) 2010
  • MSE464L - Metals and Alloys Lab (Fall Term 2010) 2010
  • MSE489 - UG Research in MSE (Fall Term 2010) 2010
  • MSE497 - MSE Honors Research (Fall Term 2010) 2010
  • MSE564 - Metals and Alloys (Fall Term 2010) 2010
  • MSE564L - Metals and Alloys Lab (Fall Term 2010) 2010
  • MSE798 - Non-Dissertation Research (Fall Term 2010) 2010
  • MSE011 - Coop/Internship in MSE (Summer Term 2010) 2010
  • MSE497 - MSE Honors Research (Summer Term 2010) 2010
  • MSE644 - Materials Characterization II (Summer Term 2010) 2010
  • MSE744 - Materials Characterization II (Summer Term 2010) 2010
  • MSE798 - Non-Dissertation Research (Summer Term 2010) 2010
  • MSE799 - Dissertation Research (Summer Term 2010) 2010
  • MSE310 - Materials Engineering Lab II (Spring Term 2010) 2010
  • MSE489 - UG Research in MSE (Spring Term 2010) 2010
  • MSE497 - MSE Honors Research (Spring Term 2010) 2010
  • MSE643 - Materials Characterization I (Spring Term 2010) 2010
  • MSE643L - Matls Characterization I Lab (Spring Term 2010) 2010
  • MSE743 - Materials Characterization I (Spring Term 2010) 2010
  • MSE743L - Matls Characterization I Lab (Spring Term 2010) 2010
  • MSE798 - Non-Dissertation Research (Spring Term 2010) 2010
  • MSE799 - Dissertation Research (Spring Term 2010) 2010
  • MSE011 - Coop/Internship in MSE (Fall Term 2009) 2009
  • MSE280 - Engineering Materials (Fall Term 2009) 2009
  • MSE489 - UG Research in MSE (Fall Term 2009) 2009
  • MSE798 - Non-Dissertation Research (Fall Term 2009) 2009
  • MSE497 - MSE Honors Research (Summer Term 2009) 2009
  • MSE798 - Non-Dissertation Research (Summer Term 2009) 2009
  • MSE011 - Coop/Internship in MSE (Summer Term 2009) 2009
  • MSE489 - UG Research in MSE (Summer Term 2009) 2009
  • MSE011 - Coop/Internship in MSE (Spring Term 2009) 2009
  • MSE310 - Materials Engineering Lab II (Spring Term 2009) 2009
  • MSE497 - MSE Honors Research (Spring Term 2009) 2009
  • MSE798 - Non-Dissertation Research (Spring Term 2009) 2009
  • MSE799 - Dissertation Research (Spring Term 2009) 2009
  • MSE280 - Engineering Materials (Fall Term 2008) 2008
  • MSE497 - MSE Honors Research (Fall Term 2008) 2008
  • MSE798 - Non-Dissertation Research (Fall Term 2008) 2008
  • MSE799 - Dissertation Research (Fall Term 2008) 2008
  • MSE644 - Materials Characterization II (Summer Term 2008) 2008
  • MSE644L - Matls Characterization II Lab (Summer Term 2008) 2008
  • MSE744 - Materials Characterization II (Summer Term 2008) 2008
  • MSE744L - Matls Characterization II Lab (Summer Term 2008) 2008
  • MSE798 - Non-Dissertation Research (Summer Term 2008) 2008
  • MSE799 - Dissertation Research (Summer Term 2008) 2008
  • MSE310 - Materials Engineering II Lab (Spring Term 2008) 2008
  • MSE464 - Metals and Alloys (Spring Term 2008) 2008
  • MSE497 - MSE Honors Research (Spring Term 2008) 2008
  • MSE499 - Senior Design Project II (Spring Term 2008) 2008
  • MSE643 - Materials Characterization I (Spring Term 2008) 2008
  • MSE643L - Matls Characterization I Lab (Spring Term 2008) 2008
  • MSE743 - Materials Characterization I (Spring Term 2008) 2008
  • MSE743L - Matls Characterization I Lab (Spring Term 2008) 2008
  • MSE798 - Non-Dissertation Research (Spring Term 2008) 2008
  • MSE799 - Dissertation Research (Spring Term 2008) 2008
  • MSE280 - Engineering Materials (Fall Term 2007) 2007
  • MSE497 - MSE Honors Research (Fall Term 2007) 2007
  • MSE798 - Non-Dissertation Research (Fall Term 2007) 2007
  • MSE799 - Dissertation Research (Fall Term 2007) 2007
  • Education And Training

  • Doctor of Philosophy in Metallurgical Engineering, Michigan Technological University 1988
  • Master of Science in Metallurgical Engineering, Michigan Technological University 1985
  • Bachelor of Science or Mathematics in Metallurgical Engineering, Michigan Technological University 1983
  • Full Name

  • Gregg Janowski