Stress-transfer micromechanics for fiber length with a photocure vinyl ester composite

Academic Article

Abstract

  • The objective was to test how increasing fiber length above the critical length would influence mechanical properties and fracture crack propagation. Micromechanics considering fiber/matrix stress-transfer was used to evaluate the results in addition to a shear debonding volume percent correction term necessary for the final analysis. Fiber lengths of 0.5, 1.0, 2.0, 3.0, and 6.0 mm with 9 μm diameters were added into a photocure vinyl ester particulate-filled composite at a uniform 28.2 vol%. Mechanical flexural testing was performed using four-point fully articulated fixtures for samples measuring 2 × 2 × 50 mm 3 across a 40 mm span. Fiber length correlated with improved mechanical properties for flexural strength, modulus, yield strength, strain, work of fracture, and strain energy release, p < 0.001. In addition, sample fracture depth significantly decreased with increasing fiber lengths, p < 0.00001. All mechanical properties correlated significantly as predictors for fracture failure, p < 0.000001, and as estimators for each other, p < 0.0001. The stress-transfer micromechanics for fiber length were improved upon for strength by including a simple correction factor to account for loss of fiber volume percent related to cracks deflecting around debonded fiber ends. In turn, the elastic property of modulus was shown to exhibit a tendency to follow stress-transfer micromechanics. © 2006 Society of Plastics Engineers.
  • Published In

  • Polymer Composites  Journal
  • Digital Object Identifier (doi)

    Author List

  • Petersen RC; Lemons JE; McCracken MS
  • Start Page

  • 153
  • End Page

  • 169
  • Volume

  • 27
  • Issue

  • 2